This Ducted Vacuum Hose with switch has a switch on the handle which allows you to switch your ducted vacuum system on or off at any time without going to the inlet. Hose cuff has the metal band to switch the machine on and off by the switch (just can’t see it in the picture).

Hose is also available with knitted hose sock already fitted. Select this from the drop down box. Note- the 10.5m hose will have a 9m hose fitted and will have a small amount of hose exposed at each end.

Compatible with many ducted vacuum systems including:- Astro Vac, Attila, Aussie Vac, Beam Central Vac, Cyclic, DAS, Electrolux, Electron (EVS), Hills, Vacumaid, Volta, Premier Clean, Auskay, Pullman, Valet, iCentral and more.

If you are upgrading from a standard hose to a switched hose please check all of your inlets, they must have two low voltage metal contact pins inside the hole of the valve. These pins are what make it possible to use a switch hose on your system, many older ducted vacuum inlets had a hidden micro switch attached to the flap or a single ball bearing switch, these inlet valves are not compatible with a switch hose, however you can still upgrade to a switch hose if you replace all of your inlets to the modern 2 pin type ducted vacuum inlet valve.

Please note that this hose is not suitable if your current hose and wand has a locking pip on it.